Two-Phase Decanters: Olive Oil Separation Without Dilution Water
In a three-phase mill, warm water is added to the paste before separation. That water carries part of the oil's natural phenolic compounds away with it, and it leaves the mill as vegetation water that has to be stored, treated or disposed of. A two-phase decanter removes that step: the paste goes into the centrifuge as it comes out of the malaxer, and only two streams come out, oil and a wet pomace. Rapanelli two-phase decanters are built for mills that want to keep more of the oil's character, simplify water management and run continuously through the harvest.
Engineering characteristics
High-torque scroll with protection on the wear surfaces
Bowl and cone geometry designed for consistent separation
Low-vibration frame for continuous operation
Differential speed control for changing paste conditions
High centrifugal force for clean oil separation
Bearings sized for long harvest campaigns
What changes in your mill
No dilution water added to the paste
No separate vegetation water stream to store
More phenolic compounds retained in the oil
Fewer streams for the operator to control
One wet by-product: two-phase pomace
A pomace outlet to plan before the harvest
How two-phase separation works
Inside the decanter, a rotating bowl applies centrifugal force to the olive paste. The heavier solids and the fruit’s own water move to the bowl wall, where a scroll turning at a slightly different speed pushes them towards the solids outlet. The lighter oil collects closer to the centre and leaves from the liquid outlet.
Because no dilution water is added, the fruit’s own vegetation water leaves together with the solids. The result is a single, wet by-product often called alperujo or two-phase pomace. Published analyses of two-phase pomace from Spanish mills report moisture around 70% (Fernández-Prior et al., 2022).
Why mills choose two-phase extraction
- More phenolic compounds stay in the oil. Phenols are partly water-soluble, so when water is added to the paste part of them is washed out. Research comparing systems found a higher phenol transfer to the oil with two-phase centrifugation than with three-phase, where a large share was lost in the wastewater (Akbarnia and Rashvand, 2019, citing Klen and Vodopivec, 2012). For producers who sell on bitterness, pungency and health-related labelling, this matters commercially.
- No dilution water to buy, heat or manage. The water line, the water heating and the vegetation water storage of a three-phase mill are not needed for the separation step.
- A simpler process. Fewer streams means fewer adjustments for the operator and fewer points where the process can drift during a long shift.
When two-phase is not the right choice
Two-phase extraction moves the problem from the liquid side to the solid side. The pomace is wet and heavy, so the mill needs a plan for it before the first harvest: storage, transport, and a buyer or processor such as a pomace oil extractor, a composting site or a biogas plant. Where no outlet exists for wet pomace, a three-phase decanter can be the better investment. We discuss this openly during sizing, because the wrong choice costs more than the machine.
Model dimensions, drum sizes and installed motor power are listed on the Decanter Centrifuge for Olive Oil Extraction page.
What we need to size your decanter
- Expected tonnes of olives per hour and per day at peak harvest
- Main cultivars and the typical maturity at harvest
- Your malaxation setup and paste temperature
- What happens to the pomace today, and what you can do with it
- Available floor space and the equipment before and after the decanter
The decanter works as part of a line. It depends on how well the crushing and malaxation stages prepare the paste, and it feeds the vertical separator that polishes the oil. We size it with the whole line in view.
Frequently asked questions
Does a two-phase decanter use any water?
No dilution water is added to the paste for separation. Water is still used for washing the olives and for cleaning the machine.
Is the oil yield lower than in three-phase?
Yield depends more on the cultivar, the fruit maturity, the paste preparation and the machine settings than on the number of phases. We assess it on your fruit and your line during sizing.
What is two-phase pomace used for?
Common outlets are pomace oil extraction, composting, energy production and, after processing, animal feed. Local options vary by region, so check them before choosing the system.
Planning a new line or replacing a three-phase decanter?
Send us your throughput, cultivars and pomace situation. A Rapanelli extraction specialist will recommend the configuration that fits your mill.
Request a decanter sizing · info@rapanelli.com · +39 0742 43 65 37

