Three-Phase Decanters: Separating Oil, Vegetation Water and Pomace
Some mills cannot accept a wet by-product. There is no buyer for heavy two-phase pomace nearby, the pomace extractor only takes drier material, or the fruit arrives very wet late in the season. In these situations the three-phase decanter remains the practical choice: it separates the paste into three streams, so each can go where the mill already knows how to handle it. Rapanelli three-phase decanters are built for mills that need this flexibility and want stable separation across changing fruit conditions.
Engineering characteristics
Adjustable liquid outlets for fine control of oil and water phases
High centrifugal force for clear separation of the three streams
Feed design that limits emulsification of oil and water
Continuous operation with limited operator input
Heavy-duty construction for long harvest campaigns
Differential speed control to keep the phases balanced
What changes in your mill
Drier pomace, compatible with pomace oil extractors
Stable separation with changing fruit conditions
Direct control of moisture and solids in each stream
Better handling of wet or late-harvest paste
Water to heat and vegetation water to manage
Lower phenol transfer to the oil than two-phase
How three-phase separation works
Warm water is added to the olive paste before it enters the decanter, to make the paste more fluid (Škarica and Tripodi, 1994). Inside the rotating bowl, centrifugal force arranges the components by density. The solids settle against the bowl wall and are carried out by the scroll. The liquid separates into two layers: the oil, closer to the centre, and the vegetation water, a mix of the fruit’s own water and the added water. Each layer leaves through its own outlet.
The position of the liquid outlets sets the boundary between oil and water. Adjusting them lets the operator respond when the paste changes during the day.
What three-phase does well
- A drier, easier pomace. Because most of the water leaves as a separate liquid, the solid stream is easier to store and transport than two-phase pomace, and it fits existing pomace oil extractors.
- Control over each phase. Adjustable outlets and differential speed give the operator direct control of oil clarity and of the moisture and solids in each stream.
- Flexibility with difficult paste. Wet, late-harvest or very ripe fruit can produce paste that is hard to separate. Dilution helps the decanter cope with it.
The trade-offs to plan for
The added water has a cost beyond the water bill. It must be heated, and it leaves the mill as vegetation water that needs storage, treatment or authorised disposal, under rules that vary by country and region. It also affects the oil: part of the water-soluble phenolic compounds is washed out of the paste. Research comparing systems found that three-phase centrifugation transferred fewer phenols to the oil than two-phase, with a large share lost in the wastewater (Akbarnia and Rashvand, 2019, citing Klen and Vodopivec, 2012).
For a mill producing premium, high-phenol oil, this trade-off deserves careful thought. For a mill whose priority is a manageable by-product and stable throughput, three-phase is often the right answer. During sizing we look at both sides with you, and compare it with our two-phase decanters.
Model dimensions, drum sizes and installed motor power are listed on the Decanter Centrifuge for Olive Oil Extraction page.
What we need to size your decanter
- Expected tonnes of olives per hour and per day at peak harvest
- Main cultivars and how wet the fruit typically is at harvest
- Where your pomace and vegetation water go today
- Your water supply and heating capacity
- Available floor space and the equipment before and after the decanter
The decanter performs only as well as the paste it receives from the crushing and malaxation stages, and its oil is then polished by the vertical separator.
Frequently asked questions
How much water does a three-phase decanter add?
It depends on the paste and the machine settings, and mills adjust it during the season. We define the operating range with you during commissioning.
Is three-phase oil lower in quality?
Not automatically. Quality depends on fruit, hygiene, temperature and malaxation time as much as on the decanter. The documented difference is in the phenolic content, which tends to be lower when water is added.
What happens to the vegetation water?
It must be stored and treated or disposed of according to local rules. Check the options in your region before choosing the system.
Unsure whether three-phase or two-phase fits your mill?
Send us your throughput, cultivars and how you handle by-products today. A Rapanelli extraction specialist will recommend the configuration that fits.
Request a decanter sizing · info@rapanelli.com · +39 0742 43 65 37

